A Hard disk stores all the important files of an Operating System. But, in certain cases, it may not function properly and throw several error messages. One such error is Windows detected a hard disk problem.
In case, you are getting this error message on the system then you need to fix it immediately. Hence, we have come up with this article to help you resolve this problem as soon as possible.
Follow this article till the end to get all the fixing methods. Moreover, we will discuss some of the causes that can lead to this problem.
Why does Windows detect a Hard Disk problem? Know the Best reasons
There may be many reasons behind the issue and that’s why we will try to explain some of them right now.
- In case, the Hard Disk is damaged, then this error message will display.
- Also if the Windows system files are missing or corrupted, then also the issue can occur.
- On the other hand, if the BSD information is incorrect or missing, then the issue may appear.
- A virus or malware attack on the system can be another reason for the issue.
- Any third-party program, conflicting with the hard disk can lead to the problem.
- If the connection between the hard disk and the system is interrupted, then the problem can persist.
These were some of the possible reasons for the error message to show up. So, as you know all the causes, now you may proceed to the following section.
Windows Detected a Hard Disk Problem Fixes at its Best
In this part of the article, you will get to the methods to fix the problem. Hence, follow all the steps for the issue to be resolved quickly.
Method 1: Run the Windows Diagnostic Test
The Windows Diagnostic tool can help you test the hard disk for any failing issues. You can follow the steps that are provided below to run the test.
- First of all, restart the system and ass the Windows logo appears, quickly press the F12 key.
- When the Boot menu appears, highlight the Boot to Utility Partition option by using the arrow keys.
- Alternatively, you can highlight the Diagnostics option and then press the Enter key to start the Diagnostics test.
- Now, this test will automatically check for all the hardware of the system and will report back if any issue is found.
- In case, there are error reports, then you will be able o fix them.
Method 2: Change the SATA Configuration
Some users have reported that changing the SATA Configuration can help to fix the problem. So, to perform the steps that are stated as follows.
- Like in the previous method, restart the system.
- As the manufacturer’s logo appears, press the F2, DEL or F12 key (depending on your manufacturer).
- Now, you will enter the BIOS setup. After that, search for the settings called the SATA Configuration.
- On finding it, click on the Configure SATA and then change it to AHCI mode.
- Finally, press the F10 to save the changes and then click on the Exit option.
- As the system restarts, you can check if the problem continues or not.
In case the issue discontinues then you are good to go. Otherwise, you can proceed to the next fix.
Method 3: Disable the Error Prompt
There can be instances, where the error message will display but the hard disk is working fine. So, in this case, you have to disable the fake error prompts.
- In the first step, press the Windows and R key at the same time.
- As the Run box opens, enter “gpedit.msc” and then click on the OK button.
- Inside the Group Policy Editor, navigate to the following path: “Computer Configuration\Administrative Templates\System\Troubleshooting and Diagnostics\Disk Diagnostic\
- Now double-click on the “Disk Diagnostic: Configure execution” level option.
- After that, check the box beside the Disabled option and then click on the Apply and OK button.
- In the next step, reboot the system and then check if the issue persists.
Method 4: Run the System File Checker (SFC) Tool
The Windows System File Checker (SFC) tool helps to scan and fix some of the major as well as minor issues.
- First of all, use the Windows and X key at the same time.
- Now, from the popup menu, click on the Command Prompt (Admin) option.
- As the Command Prompt window opens, you have to type “sfc /scannow”. After that, press the Enter key.
- Allow the command to execute and if it fails, then type the next command.
- Now, type “sfc /scannow /offbootdir=c:\ /offwindir=c:\windows” and then hit the Enter key again.
- Once the command executes, you can check if the problem still occurs or not.
This is how you can run the SFC to fix the issue.
Method 5: Use the Check Disk (CHKDSK) or Run Disk Error Checking Tool
The Check Disk tool helps you check for errors in the hard disk.
- Like in the previous method, open the Command Prompt (Admin) window.
- Inside the Command Prompt window, type in “chkdsk C: /f /r /x” and then hit the Enter key.
- Now, it will ask to schedule the scan in the next system reboot. Type Y and hi00t the Enter key.
- Now, reboot the system and then wait for the disk checking process to finish.
- Once done, check if the hard disk is still in the previous state or not.
So, after carrying out these steps, you will be able to fix the issue on your own.
Method 6: Utilize the DISM Command
The DISM command helps a user to fix the corrupted Windows System Files. And to run it, follow the steps.
- Open the Command Prompt (Admin) and type the following commands in it: Don’t forget to hit the Enter key after typing each command
- First Command: Dism /Online /Cleanup-Image /CheckHealth
- Second Command: Dism /Online /Cleanup-Image /ScanHealth
- Third Command: Dism /Online /Cleanup-Image /RestoreHealth.
- Now let the commands run and wait for it to finish.
- In case the previous three commands fail, then enter the following ones and press the Enter key after every command.
- First Command: Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
- Second Command: Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
- Once the commands execute, check if the hard disk starts to function properly or not.
Therefore, by this, you can easily fix the problem on your own. For other troubleshooting methods, you can move to the next section.
Final Words
To conclude this article, we have tried to explain to you the best possible methods to fix this Windows detected a hard disk problem. Apart from them, you can even restore the Windows OS to get rid of it.
Thus, follow each and every method according to their order so that the issue can be fixed with minimum effort. Moreover, you will no longer face such an issue afterward.
In case the issue still persists, then get back to us through the comments section below. Here, you will get the best help from the technicians.
