Windows 10 Can’t Connect To This Network? 5 Effective Ways To Fix It

Even though Windows 10 is the most standard development of Microsoft, it still encounters certain problems. One of them is the network issue. The annoying error alert stating that Windows 10 can’t connect to this network perplexes several users. Eventually, they seek solutions in order to treat it but without the prior knowledge as to what the problem signifies.

Furthermore, it is also vital to know the probable reasons before implementing the methods. Therefore, we encourage you to proceed to the procedure section only after you have given a thorough read to the probable reasons. However, here it is easy to guess the root cause. But, doesn’t indicate that there isn’t a second critical cause for it to happen.

However, read out this article and make an attempt with the procedures mentioned below to troubleshoot the network issues.

Probable Causes for the Windows 10 Can’t Connect to this Network Issue:

Since the main concern is centered around the disturbance in maintaining a stable network connection, the major cause is easy to guess. There may be a problem with the internet connection itself or delivery issues of the service provider. Also, consider the weather since it may impact an otherwise seamless flow of connection.

Furthermore, the problem can also be with the Windows system as well. At times, outdated network drivers tend to conflict with the Operating System. This eventually hinders the system to make a stable connection. This is when Windows 10 can’t connect to this network issue triggers, even it triggers multiple other issues. Such problems create a hindrance in the workflow of the users.

However, now that you possess some idea regarding the probable causes of the issue, proceed to the next section. Be careful while implementing the steps and making changes since some of them are pretty critical.

Easy and Effective Ways to Fix Windows 10 Can’t Connect to this Network Issue:

Now that you are aware of the major causes, these fixes will assist you in successfully troubleshooting the problem comprehensively. Also, we have presented the most effective solutions so you don’t have to try hard and yield zero results. Having read the section which holds the reasons, you can now guess the areas which we aim to hit. In this way, the entire procedure of troubleshooting is accelerated. Thereby, it brings about favorable results in a prompt manner.

With the knowledge of the probable causes, you get to know the exact area to hit. That is, you know where to look while trying to fix an issue. In this way, you possess an idea about the error as well as the ways in which you can solve it.

Several users have reported that their system can’t connect to this network Windows 10 issue. However, one can easily fix it provided they adhere to the steps of the underlying individual methods carefully.

Procedure 1: Uninstall the Network Adapter

In this method, we suggest you uninstall the network adapter and re-install it after that. At times, during some problem, the adapter malfunctions which reflects the failure of connection. In such a scenario, it is best to uninstall it and then re-install the network adapter anew. However, you just require to conduct the uninstallation since the installation takes place automatically. To do this, obey the underlying steps.

  • Firstly, press and hold down the Windows button along with the X key in unison. From the list, select the option Device Manager.
  • Then, in the Device Manager dialog box, right-click on the Network Adapter and then proceed to click on the Uninstall option.
  • After that, inspect the option Delete the driver software for this device and click on OK afterward.

Finally, restart the computer system which might trigger Windows to conduct the installation of the appropriate driver program. In this way, one can treat the Windows 10 can’t connect to this network issue with ease. However, if this did not yield anything, make sure to try the next method.

Procedure 2: Update Network Adapter

Here, we discuss how to update the network adapter. If the basic uninstallation and re-installation did not serve you well, then take the hint! It indicates that the adapter needs a mandatory update. Doing this can solve the annoying issue comprehensively.

At times, an outdated network adapter triggers a clash with the OS and this eventually hinders the Windows system to make a secure connection. During such a time, you cannot make any assessment as to why the Windows 10 can’t connect to this network. However, this signifies the need for an update.

For this, head to the official website and locate the network adapter which is compatible with your computer system. Then, proceed to download the updates, if available. After that, install them considering the on-screen instructions. Also, make sure that the version is relevant to the system configuration.

In this way, an update can treat the can’t connect to this network Windows 10 issue conveniently. Furthermore, this method does not require many hassles too. However, in case any problem arises and the issue refuses to go away, the successive sections will ease you out of the complication.

Procedure 3: Disable IPv6

Yet another procedure for troubleshooting the network connection issue is to disable the IPv6. Now, the name may suggest something critical to the non-tech-savvy group, but the procedure is extremely easy. This only requires you to be careful while implementation. Therefore, just adhere to the underlying steps properly.

  • Press and hold down the Windows key along with the R button in unison. This input brings forth the Run dialog box.
  • In the blank field, type a command “ncpa.cpl” and after that, proceed to hit the Enter button.
  • Next, do a right-click on the network adapter and then proceed to click on the Properties option.
  • After that, proceed to uncheck the Internet Protocol Version 6, that is, TCP/IPv6 box. Finally, hit the OK button.

This is sufficient to troubleshoot the Windows 10 can’t connect to this network issue. Also, this procedure is an in-depth method to treat the connection disturbance of a network. But, even such a procedure can fail to yield the changes that you desire to bring forth. This is when you must proceed to the successive section which deals with another effective solution.

Procedure 4: Employ Network Troubleshooting Commands

In case the above-mentioned steps weren’t of any help, this is what should fix the problem. Use the troubleshooting commands in order to solve it completely. To do this, obey the underlying steps.

  • Firstly, press and hold down the Windows button along with the X key in unison. Then, from the menu, select the Command Prompt.
  • Now, when the window of the Command Prompt appears, enter the following commands which we have mentioned. Make sure to enter them in a manner of a list. For that, press the Enter button after every command.

netsh winsock reset

netsh int ip reset

ipconfig /release

Then, “ipconfig /renew”

ipconfig /flushdns

Maintain the spaces as written or else nothing works. Once again a reminder, make sure to press the Enter button after typing each command.

  • Then, proceed to Close the Command Prompt after it has executed the commands successfully.

Finally, proceed to restart the computer device. Do this in order to make the changes effective. Now, the Windows 10 can’t connect to this network is sure to vanish. However, if in case it doesn’t, the successive procedure is the ultimate resort and will surely assist you in fixing the problem.

Procedure 5: Run Windows Network Troubleshooter

If none of the methods were productive in troubleshooting the network error, you must run the network troubleshooter. This feature in Windows 10 is an impressive development when it comes to treating numerous undetectable errors. It diagnoses and brings the error out in the forefront.

Furthermore, it also fixes the problem so that the users encounter no hassles. However, to do this, stick to the underlying steps and be careful while implementing them.

  • Firstly, head to the Start menu and then in the search box, enter Network Troubleshooter. Click on it and after that, from the list, proceed to select Identify and repair network problems.
  • After that, adhere to the steps in the troubleshooter. Wait patiently in order to let the entire procedure to complete.

Finally, when all is done, proceed to inspect if the problem lingers still. The Windows 10 can’t connect to this network will surely go away. You can also resume the earlier seamlessness of workflow.

Wrapping Up

In this manner, you can troubleshoot the network connection issue. However, we encourage you to try your hands on the problem regardless of its degree of complexity. You get to know how it is solved and also you don’t need to pay a dime for it. In most cases, the mentioned solutions are sufficient to treat the Windows 10 can’t connect to this network comprehensively.

But, in rare scenarios, the issue stays still and refuses to go away. This is when you can consult professional assistance for troubleshooting and fixing the issue completely. Also, with their assistance provides hassle-free services for availing which you must pay. However, employ this option only when the mentioned steps fail to yield proper results.

Share your love
Nathaniel Villa
Nathaniel Villa
Articles: 1771