Windows 10 is one of the finest Operating Systems among all the users’ nowadays. This Operating System is well known for its incredible features and outstanding technology which is enough to grab the users’ attention. However, there might be some issues where you can get stuck with the version after a time, which is obvious enough. Among all of its issues, Windows 10 black screen with cursor is one of the evil ones. This issue mainly arises due to the faulty graphics card or incompatible graphics driver. The error strikes with an error note on the screen that says “Windows has encountered an unknown error, black screen with cursor”. It seems quite frustrating when you have a burden of work and the Windows stuck on the black screen.
So, if you are one of those helpless and in need of some effective solutions to crack this issue, then you have landed on the right spot. In this content, we will discuss all the prime causes and effective solutions to terminate this annoying issue as soon as possible.
Probable Causes for Windows 10 Black Screen with Cursor Issue
If the Windows 10 black screen with cursor issue stuck on your computer accidentally, then there might be several causes behind this fault. This issue mainly occurs due to a faulty graphics card driver installed on your system. If you are using the multi-monitor feature or the onboard graphics, then it can result in this issue on your Windows 10. A third-party application is another prime cause for this issue. If you have not disconnected the secondary monitor or if you have not set the display output to IGFX, it will cause a black screen issue with a cursor on your screen. A faulty BIOS or the outdated one is another suspect for this issue. However, we have enough solutions to crack this issue that we will discuss in the next segment.
Effective Methods to Resolve Windows 10 Black Screen With Cursor Issue
We have arranged a few effective and time-saving methods in order to eliminate black screen with cursor windows 10 issue. You can proceed through either one of these solutions or all the methods unless you have the issue sorted out:
Method 1: Use the Windows Shortcuts to Switch the Displays on your Windows 10
Windows has an in-built feature to switching the displays that allow the computer to resolve screen related issue. Go through the steps mentioned below in order to accomplish the task:
- At first, switch on the computer and tap the Windows + P key at the same time on your keyboard to invoke the Project menu.
- Now, when the project menu appears on the screen, press the Up and the Down arrow keys for a couple of times.
- After that, tap the Enter key and repeat the same steps for a few times.
Now, close all the tabs manually and restart the computer as usual. See if the screen related issue is now resolved on your Windows 10. If still, you are getting issue regarding this error, try another solution discussed below.
Method 2: Uninstall the Graphics Card Driver from Control Panel
If you are getting the black screen issue with a cursor on the screen, then this might be due to the conflicted graphics driver. A faulty graphics driver or the corrupted one can also cause this issue on your computer. Hence, go through the steps below in order to uninstall the graphics driver from the Control Panel:
- At first, switch on the computer and tap the Windows Start key from the very left-bottom edge of the screen.
- After that, type Control Panel into the Search pane and tap the Enter key to open the action.
- When the Control Panel opens on the next screen, locate the Programs and Features option.
- Now, locate the Graphics Driver you have installed on your Windows and right-click on that.
- Select the Uninstall option from the list of search results and click on the Ok button to complete the task.
After successfully uninstalling the service pack, restart the computer and see if the error is now all settled as earlier. If still, you are facing the same issue or the above method doesn’t aid, try another solution below.
Method 3: Disable the Dual Monitor Function from BIOS on your Computer
If you have CPU multi-graphics monitor installed on your Windows 10, you need to disable the feature in order to get back your PC in the error-free state as earlier. Go through the steps discussed below in order to succeed in the task::
- At first, if the computer is turned on, simply restart the computer manually as usual.
- When the computer restarts and the logo appears, tap the F2 or the Del button immediately on your keyboard.
- After that, locate the Dual Monitor Function when the BIOS menu appears on the next screen and click on that.
- Select the Disable option from the list of the search results and click on the Save option to save the changes.
At last, simply exit all the active Windows and restart the computer to see if the error is now fixed. If the issue still continues or the above method doesn’t work, try another solution below.
Method 4: Disable the Onboard Graphics from Device Manager on Windows 10
If you are using both onboard and dedicated graphics on your Windows 10, then this might result in this issue on your computer. You need to make sure that you have disabled the onboard graphics in order to get back your PC as earlier. Go through the steps mentioned below to accomplish the task:
- At first, if you have the computer turned on, restart the computer manually and enter the Safe Mode.
- After that, locate the Onboard Graphics option from the right corner of the screen.
- Now, right-click the option and select the Disable option from the list of results.
- At last, click on Save and simply close all the Windows normally to complete the task.
After successfully disable the Onboard Graphics feature on your Windows 10, restart the computer and see if the issue is now all settled. If still, you are facing any trouble regarding this issue or the above methods don’t work, try the next solution discussed below.
Method 5: Disable the Secondary Output Feature from Device Manager
If you have the black screen issue with a cursor on Windows 10, then there might be some faults regarding Secondary Output feature. If you have mistakenly enabled the feature or if the feature is enabled by default, then it will result in this error. You need to disable the feature back to get escape from this issue. Go through the steps below in order to accomplish the task:
- At first, turn on your computer and press the Windows + X key at the same time from your keyboard.
- Invoke the Device Manager and locate the Display Adapter section from the list of search results.
- Expand the section and click on View from the top of the lists.
- After that, select the Show Hidden Devices option from the very bottom of the list and click on that.
- Now, on the next screen, click on Secondary Output option from the left pane of the screen.
- After that, right-click on that and select the Disable option from the list of the search results.
After successfully disable the Secondary Output feature on your Windows 10, restart the computer and see if the issue is now resolved. If the black screen issue still persists or the above method doesn’t work, try the next solution below.
Method 6: Set the Display Output to IGFX on your Windows
IGFX stands for the Intel Graphics Media Accelerator or an onboard graphics chip that allows the computer to fix the black screen issue with a cursor on the screen. You need to set the feature on your Windows from the BIOS menu to resolve this trouble. Go through the steps discussed below in order to accomplish the task:
- At first, if the computer is turned on, simply restart the computer manually and keep pressing the F2 key until you are getting into the BIOS menu.
- After that, locate the Display Output option from the list of the results and click on the IGFX option.
- Now, invoke the action and click on the Default option from the very bottom of the screen.
- At last, click on OK and then on Save to save the changes you made.
After successfully you have set the IGFX on your Windows 10, restart the computer and see if the issue is now fixed. If still, the above methods don’t work or the issue continues, try another solution below.
Method 7: Update the Computer’s BIOS Version Manually
If none of the earlier plans acted, then updating the computer’s BIOS version is the single thing that can help to fix black screen with cursor windows 10 issue. Damaged BIOS version or antiquated BIOS version can definitely stop the Window to access. Go through the steps in order to update the BIOS version:
Downloading the BIOS File
- At first, tap the Windows Start key located at the bottom-left edge of the screen.
- Type “msinfo” into the search session and hit the Enter key to invoke the System Data on the next window.
- Now, find the System Model title, on the screen and copy the computer’s model signature and number.
- After that, drive to the BIOS version number on the desktop. On the other hand, if you have a custom-built computer, simply jump this step.
- Now, inaugurate a web browser on the desktop and direct to the manufacturer’s website to download the BIOS data.
- Enter the BIOS version product, Model number, and Model title in the box and tap the Enter key to hunt for the latest BIOS version.
- You can view a table of all the options on the next screen. Simply click on the ‘Download’ button at the very back of the page.
- Next, click on ‘Confirm’ choice to start the BIOS download.
Installing the BIOS
- After the download finishes, proceed to the Drive/Folder where you have saved the BIOS file and simply crack the folder.
- Copy all the records to a USB drive and restart the computer to start the method.
- When the logo seems on the startup screen, simply clasp the F12 key to enter the BIOS setup sheet.
- Choose the BOOT tab from the screen and assure that the USB drive is showing the Flash title.
- Pick the Flash option, from the Advanced tab and enable the computer to update the BIOS file manually.
- Double-click on the BIOS.exe file and choose the Extract option from the menu.
- Now, click on the Run option, and then on Next to start the installation method.
- Agree on the “Accept all the Terms and Conditions” option, and then click on Next option until the software application starts installing.
- Do not turn the computer off while the BIOS is renewing and click on Finish key after the BIOS installation gets to the end.
After completing all those steps, restart your computer and you are no longer affected with any issues concerning this issue.
Summing Up
Windows 10 black screen with cursor issue is one of the most bothersome situations that several users have encountered. The issue disrupts the whole computing system and results in unable to access further assignments. We have shared all the powerful and time-saving hacks in order to settle this issue. Hope the above article was profitable enough to guide you on how to fix black screen with cursor Windows 10 issue. In case, the above techniques don’t aid or the issue still lasts, then there might be some other hardware faults or internal defects. In that case, positively you can consult with a specialist or take trained guidance to get back your PC in working state as earlier. Lastly, submit your precious feedback here in the comment box to let us grasp your knowledge.