Windows users are mainly confronted with the total identified Windows installations 0 error when there are corrupted registry entries. Moreover, this is caused by damage or if the BCD store has gone corrupt. Apart from that, when you are trying to run the bootrec boot command on your Windows device, you can get this error. However, this command is normally used to fix a number of startup problems. Due to this, Windows failed to start hardware and software as well. Mainly, the problem occurs when you have booted your device and used multiple troubleshooter tools on your device. For this, it is difficult for you to fix the issue easily. In general, nothing works and the problem arises when you start up the system. The only thing that pops up on the system screen is the error message.
If you are going through the same situation, this article is helpful for you. But, before going anywhere, you should try some troubleshooting techniques. Hence, in this article, we are providing some effective solutions which are helping you in order to fix the issue.
The Practical Guidelines for Total Identified Windows Installations 0
In this section, you will get to know the effective ways to troubleshoot the issue total identified windows installations 0. Hence, follow the steps one after the other until you fix the problem. The solutions are explained through simple language so that you can understand them easily.
Solution 1: Registry Recovery
In order to get rid of this situation, the first thing that you do should try to recover the registry entries. The problem can be caused due to various circumstances. However, if one of the components of the drivers that are installed on your windows device might be corrupted. Due to this, the problem total identified windows installations 0 Windows 10 appear on your device.
You can fix the issue by applying the following steps. Hence, go through the steps carefully and apply them accordingly:
Step 1
At first, insert the recovery drive on your device and restart the system. The steps might differ from the different Operating Systems.
Step 2
After that, bring up the Run dialog box and type“C:\Windows\System32\config” in the Run window. Now, open a Command Prompt box and hit the Enter button.
Step 3
Next, enter the following command in the Command box one by one. Press the Enter button each time.
First Command: cd windows
Second Command: cd system32
Third Command: cd config
Step 4
After that, run the following command to replace the DEFAULT, SAM, SECURITY, SOFTWARE, and SYSTEM folder.
First Command: del c:\windows\system32\config\sam
Second Command: del c:\windows\system32\config\security
Third Command: del c:\windows\system32\config\software
Fourth Command: del c:\windows\system32\config\default
Fifth Command: del c:\windows\system32\config\system
Sixth Command: copy c:\windows\tmp\software c:\windows\system32\config\software
Seventh Command: copy c:\windows\tmp\system c:\windows\system32\config\system
Eight Command: copy c:\windows\tmp\sam c:\windows\system32\config\sam
Ninth Command: copy c:\windows\tmp\security c:\windows\system32\config\security
Tenth Command: copy c:\windows\tmp\default c:\windows\system32\config\default
Step 5
After executing the above command, restart the system and check if the problem still persists or not. Otherwise, move to the next section.
Solution 2: Boot the Recovery Option
In Windows, you will find a useful built-in feature which is called Boot Recovery. You can access this with the help of the Command Prompt box. This tool helps you to boot into the computer easily and able to fix the various problems related to the BCD. Hence, follow the instructions as described in the section below:
Step 1
At first, press the Start button and type “cmd” in the search box to bring up the Command Prompt on your device.
Step 2
Next, type the following command and succeed it with an Enter.
Bootrec / rebuildbcd
Step 3
After executing the above command you will find a message saying that,
Scanning all disks for Windows installations…..
Step 4
After that, you need to rebuild the Windows after entering the following command:
bcdedit /export c:\bcdbackup
attrib c:\boot\bcd -h -r -s
Step 5
The first command is to back up the previous BCD store and the other one deleted certain attributes. This restricted the action. After that, you need to delete and rename it by performing the following commands.
ren c:\boot\bcd bcd.old
Step 6
Next, you should repeat the whole procedure from the beginning where you received the error message and enter the following command;
bootrec /rebuildbcd
Step 7
When the above command executes you will find a prompt message which displays
Please wait, since this may take a while.
Step 8
At last, press the Yes option to complete the process. Check whether the error message still persists or not and after this, you can easily boot your device in a normal way.
The Ending Notes
In the above guide, we have explained some simple solutions which can help you to resolve the total identified Windows installations 0 efficiently. All the methods are quite feasible and in fact, too easy to perform. Hope, after performing all successfully, you can surely fix the issue instantly.
Frequently Asked Questions
What does Total identified Windows installations 0 mean?
Does Windows 10 have Bootrec?
What is RebuildBcd?
This option searches all discs for Windows Vista or Windows 7 compatible installations. It also allows you to choose which installations you want to add to the BCD store. When you need to entirely rebuild the BCD storage, choose this option.
