A Comprehensive Guide To Resolve Video Scheduler Internal Error On Your Windows 10

Video scheduler internal error is one of the most complicated error codes which occurs due to the corrupted system files or the faulty hard drive’s issue. 

 

Several Windows 10 users have reported this issue but thankfully, we have got some premium solutions to deal with this error.

 

So, in case, you are coming across this error and looking for permanent solutions to eliminate this bug, then go through this article till the end.

 

In this article, we have shared the root causes and effective solutions to terminate this error code as soon as possible.

Probable Causes for Video Scheduler Internal Error:

If you are getting the video scheduler internal error Windows 10, then it might be due to several causes.

 

This error code mainly occurs due to the hard drive corruption or the faulty hard drive installation.

 

If you are using outdated device drivers or the Windows update, then it can cause this issue on your Windows 10.

 

Faulty device drivers or the corrupted system files are another prime cause for this error.

 

However, in the following section, we have explained some solutions to deal with this error so that you can continue your work seamlessly.

Premium Solutions to Get Rid of Video Scheduler Internal Error:

 

Here, we are sharing all the possible and effective solutions to resolve the video scheduler internal error Windows 10 issue in minutes.

 

You can go with either one of these solutions or all the solutions until you get the internal video scheduler error fixed permanently.

Method 1: Check for Possible System Files and Hard Drive Corruption

 

The wicked system data or the faulty hard drive is one of the prime reasons for the occurrence of video scheduler error or the BSOD problem on your Windows.

 

You need to check all the hardware corruption and the system files to verify the issue. Here are some solutions that you can perform to eliminate this error.

 

1. Turn on your computer and type cmd into the Windows Search pane to invoke the Command option.
2. Click on the top result from the list and select Run as Administrator option.
3. Click on Yes to continue and type “chkdsk” into the Command pane.
4. Tap the Enter key and press the “Y” key on your keyboard.
5. Again, restart the computer and invoke the Command Prompt by doing the same as mentioned in step 1 and 2.
6. Now, this time type “SFC/scannow” into the command pane and tap the Enter key to proceed.

 

Wait for a while until the Windows detects any fault and then simply restart the computer to see if the scheduler internal error is now fixed.

 

If the above method fails or the error still exists, try another solution discussed below.

Method 2: Update the Device Drivers from Device Manager

If the device drivers are running outdated or are corrupted, then it will result in the Windows video error issue.

 

Go through the steps discussed below to update the device drivers manually.

 

1. Turn on the computer and tap on the Windows Start button from the left pane of the screen.
2. Type Device Manager into the search pane and tap the Enter key to invoke the action.
3. After that, click on the top result from the list and locate the driver you want to update.
4. Now, double-click the software driver and select the Update Driver option to begin the process.
5. At last, click on the Search Automatically for Updated driver option and then click on OK to confirm the action.

 

After that, the computer will start searching for the best available version for your device. Install the software manually and do the same for all the outdated drivers to update.

 

Now, restart the computer and see if the BSOD error is fixed as earlier. If still, the issue remains or the above method fails, try out the next solution discussed below.

Method 3: Run the SFC/scannow Method on your Windows

SFC/scannow is an in-built feature that allows the computer to scan for the several windows issues.

 

You need to run this feature on your Windows system to get back the device error-free as earlier.

 

Here are some steps provided below that you can try to resolve this issue.

 

1. At first, turn on the computer and invoke the Command Prompt (Admin) from the Windows Start bar.
2. After that, type SFC/scannow into the search pane and again, tap the Enter key to open the SFC/scannow tool on the screen.
3. Wait until the searching is completed and click on the Repair button below when the search is completed.
4. After that, click on the Finish button and then simply close all the tabs.

 

Now, restart the computer as usual and see if the internal video scheduler error is now fixed at all.

 

If the error still prompts on the screen or the above method doesn’t aid, try the next solution listed below.

Method 4: Update All the Available Windows Updates

Using the outdated or the faulty system patches on your Windows 10 is another prime cause for getting the internal video scheduler error.

 

You need to be updated with all the system patches and the Windows update to eliminate this error. Below provided are some steps to update Windows.

 

1. At first, turn on your computer and tap the Windows + I key to invoke the Windows Settings on your PC.
2. When the page opens on the next screen, click on the Update and Security option from the lower side of the screen.
3. Click on the Check for Updates option from the right side of the screen and wait until the Windows recognize if there any update available.

 

If there is any update available, simply install the latest update and restart the computer when it is over.

 

Now, see if the BSOD or the internal video error is now resolved. If the error still remains or the above method fails, try out the next solution below.

Method 5: Reinstall All the Faulty Drivers on your Windows 10

 

Video scheduler internal error can also prompt due to using the faulty or wrecked drivers installed on your PC.

 

You need to first uninstall those drivers and then reinstall those back in order to terminate this error.

 

Following are some steps that you can try to complete the task.

 

1. Turn on the computer and press the Windows + X key to launch the Windows List on the screen.
2. Now, click on the Device Manager from the menu and click on the Scan for Hardware Changes option.
3. Locate the applications that have a yellow mark next to the application and right-click on that. The yellow sign indicates that the driver is either faulty or is corrupted.
4. Now, select the Uninstall option from the list and click on the OK button to confirm the deletion.
5. Do the same for all the applications and simply restart the computer after the uninstallation is completed.
6. Now, open a web browser and drive to the manufacturer’s website. Next, simply download and install all the drivers back to your PC.

 

After that, restart the PC as usual and you are no longer affected with any errors regarding the internal video scheduler issue on your Windows 10.

Summing Up

 

In this article, we have shared all the probable solutions to terminate the video scheduler internal error on your Windows 10.

 

In case, the issue still exists or the above methods fail to terminate this error, then feel free to consult an experienced technician to get back your PC in working state as earlier.

 

If the above article was beneficial enough to you, then drop us your precious feedback here in the comment section below.