Machine Check Exception Windows 10: Simple Solutions To Fix It

A Machine Check Exception is output from the Machine Check Architecture within the Central processing unit triggered for detecting and reporting hardware errors. Hardware failures, such as those reported by the machine check architecture will always be generated due to faulty hardware. When an MCE is trapped by the CPU, it will usually halt the ESX host, and produce a purple diagnostics screen. You should always try and take a readable picture of the purple diagnostic screen prior to the reboot.

Few Basic Causes For This Error

  • System error is identifying with hardware.
  • Problems with memory.
  • Issue related to Physical hardware.
  • Outdated corrupt drivers.

Easy Solutions To Fix Machine Check Exception

Solution 1: Update Driver

This is the most common solution that most of the users try. You should update the driver on a time basis. An outdated driver is the main culprit for this problem. To update it, press Windows Key + I simultaneously to open Update & Security. At that point go to the View Update history. Look for an updated version available for your device or not. If available, then click on Update to get the latest version of your device. It will download the updated version and install it. At that point, restart your PC to apply the changes.

Solution 2: Check Physical Hardware

If the above the solution does not help you to fix the problem, then you should go with this method. Check all the physical hardware placed properly or not. Check the RAM seated in his position or not? Is your CPU getting hot? Check your GPU placed in his place or not? A Machine Check Exception error occurs due to your system hardware. Have you introduced another part or exchanged some equipment around?

You have clean the dust. It means you have to clean the fan. Due to this, you can fix the error.

Solution 3: Run CHKDSK

Windows Check Disk is another solution to fix the problem. If you run your computer, then the problem should be solved.

Press Windows key + R to open the Run box. Type ‘cmd’ to open the Command Prompt. Then, in the Command Prompt type ‘chkdsk/r’ and press Enter. This command scans your system to fix the error.

Solution 4: Run SFC

Another Windows system tool is System File Check(SFC). It checks missing and corrupt files. Especially it checks Windows files while CHKDSK scans your drive.

Go to the search bar and type ‘cmd’ to open the Command Prompt. Then, select Run as administrator. Then, type the following command…

DISM/online/cleanupimage/restorehealth.

It will take up to 20 minutes to complete. After completing the process type ‘sfc/scannow’ and press Enter.

Solution 5: Using System Restore

One of the best solution to fix this error is restored the system. You can easily fix the error when you restore your device. To do this, go to the Control Panel and click on System and then on System Protection. Here you will see an option System Restore, click on it. After that, click Next. Then select Restore Point and click Next. Finally, you will find an option Finish, click on it. To confirm the restore click Yes. After completing the restoring process, restart the device and also see the changes.

Solution 6: Update And Reset BIOS Settings

BIOS is a firmware. If you update or reset the settings option of BIOS, the error might be fixed.

Check the BIOS settings update or not. If an updated version available, then update it. If you want to change the BIOS settings, then follow the below steps.

  • Go to the Settings option. Open it.
  • Select Update and Security and then click Recovery option from the left menu.
  • Then select Restart Now option to reboot the system.
  • After restarting the system, click Troubleshoot and then Advanced options.
  • Open the Advanced Option, select UEFI settings. Finally, click Restart.

After restarting, you will take to the BIOS.

Solution 7: Boot Into The Safe Mode

If you boot your system in the safe mode, the error might be fixed. When you can’t access the Windows anymore, boot into safe mode to open the Windows and fix it.

Solution 8: Disable The LAN Adapter

Disabling the network adapter is the solution to fix this error. Go to the Control Panel and select Device Manager. There you can see the Network adapter option available. Right click on it and click Disable option from the menu to disable the LAN.

Then, restart your computer. And check your problem is solved or not.

Solution 9: Reset Windows 10

If the above-mentioned solutions do not help you to fix the error, then the last option format the C drive and reinstall the Windows drive. To do this, go to Settings option.

Settings> Update and Security> Recovery. There you will find Reset option. Click on that to reset the PC. it will take time. After restarting the PC, you will observe that your problem fix.

Note: After applying these methods, you can surely fix the issue. Hope, this content is helpful for you to resolve the Machine Check Exception in Windows 10. This content is completely written on behalf of the users, and we wish that every part of it prove beneficial for your knowledge and at your workplace.

Share your love
Nathaniel Villa
Nathaniel Villa
Articles: 1771