Ethernet Not Working – Easy and Effective Hacks to Resolve the Glitch

Although WiFi is much in trend these days, many users still prefer using Ethernet Ports for effective internet connections. However, for those who are not that conversant with the Ethernet ports, these are actually wired connectivity ports that come with internet routers. 

Now, essentially speaking, for the users using Ethernet ports, “Ethernet Not Woking “ can be quite a frustrating technical hitch. To put it simply, “Ethernet not working” in generic terms imply that your PC  is not getting connected with the Internet. 

And since most users connect their PCS by means of a cable, the driver or the cable port might be having some problems. Thus, in case, you are looking for effective solutions to such an issue, this article is just for you. 

In this article, we are going to offer you the most effective workarounds to resolve the glitch

Why is the Ethernet Port Not Working? Major Causative Factors

“Ethernet not working” is indeed a persistent hitch recurrently faced by the users. Now, facing this problem repeatedly, you must be wondering why is the Ethernet port not working. Essentially speaking, there are many causes responsible for this.

Below we enlist some of the major causes that might trigger the problem. Take a look 

  • One of the most typical causes triggering the problem of “ Ethernet not working Windows 10” is a defective wire connection. 
  • Also, the Ethernet port might stop functioning properly if you have an unstable network or internet connection.  
  • Besides, “Ethernet not working” can be an adverse outcome of using old and outdated drivers. 
  • Lastly, the problem under discussion might get triggered due to any hardware or software related problems. 

Apart from the causes mentioned above a corrupt or broken port or existing third-party antivirus software might cause the hitch. 

Ethernet Not Working Still? Here are the Surefire Fixes 

We understand that “Ethernet not working Windows 10” is quite an annoying glitch. Nevermind, you have nothing to worry. The problem is quite easily fixable. 

In this section, therefore, we are about to provide you with proven solutions to the problem. Follow them thoroughly and try to execute them accordingly. 

 Fix 1: Check if you have Enabled the Ethernet Connections Properly 

Sometimes, the problem might occur simply because the Ethernet connection is not properly enabled. Therefore, check twice to ensure that your Ethernet connection is activated. 

In case, you find that the Ethernet Connection is disabled, follow the steps cited below to enable it. 

  • At first, initialize the Run Command by means of pressing the Windows Key + R simultaneously from the keyboard.
  • As soon as the Run dialog box pops up on the screen, feed in the command “devmgmt.msc” in the address bar. Then, click on the Enter button. 
  • Following this, you must double-click on “Network Adapters” option. 
  • Thereafter, you will have to detect the network device you are using and right-click on the same.
  • Once done, choose the “Enable” option. If you find the Ethernet already enabled, you can first disable and then re-enable it. To do this, you just have to click on the Disable icon first and then again press the Enable option.  
  • You may also note that the moment you press the Enable button, your device your restart afresh. 

That’s it, on successful completion of the entire procedure check whether the issue is fixed or not. 

Fix 2: Try Discharging the Power Connection Temporarily 

One of the quickest fixes for the problem of “Ethernet port not working” is to discharge the power connection temporarily and re-establishing it back again after a couple of seconds. You will just have to unplug the power cable and replug it back again after about 30 seconds approximately. This might resolve your glitch. To do so, execute the steps listed below.  

  • First and foremost, you must turn Off the Power button on your computer.
  • Thereafter, you will have to unplug the power connector. Ensure that you remove your battery in case you are using a Laptop. 
  • Following this, long-press and hold the power button for around 30 seconds and release it thereafter. 
  • Plug back the power connector to the system. Then, turn On the Power button of your device. 

By doing this, you should no longer face the technical hitch in question. 

Fix 3: Try Updating the Drivers 

In case, the fixes mentioned above didn’t work, causing the issue to still persist, then it might be due to a defective or outdated driver. Needless to say that in such cases, you must update your drivers to the newest version. 

Have a look at the procedure to do this.

Detailed Guide to Update the Drivers Manually:

Essentially speaking, you can update the drivers either automatically or manually. However, it is best to try out manual updating since often automatic updating of the drivers proves ineffective.

Thus, execute the steps stated below to update your drivers manually 

  • Initialize the Run command by means of pressing the Windows key and R simultaneously.
  • Thereafter, feed in the command “devmgmt.msc” and click on the Enter key.
  • Following this double-click on the “Network Adaptors” option 

You can, therefore, check out the latest drivers by means of performing the following steps. 

  • At first, you will have to detect your Network Device and double-click on the same 
  • Then, press on the Driver Tab 
  • The moment you do this, in the Driver section, you will find the Driver version.
  • Following this, you must visit the manufacturer’s official website and look out for the latest version of the drivers. 
  • Next, when you detect the latest version of the driver, download it. 
  • On completion of the steps, you should detect your network device once again and right-click on the same. 
  • Thereafter, choose the “Update Driver Software”.
  • Following this, you will have to press upon the option that saysBrowse my computer for driver software”. 
  • Then, press on the Browse option and choose the driver you downloaded previously.
  • Thereafter, click on” Next” and adhere to the subsequent on-screen prompts in order to execute the additional steps.

On successful execution of the entire process, you will have to reboot the System. This should fix your glitch.

As we sum up our article, we strongly recommend all our readers to take note of the surefire fixes we offered. And, in case you find your “Ethernet not working” don’t delay to apply the methodologies we suggested. These are indeed the most effective fixes for you. 

Share your love
Nathaniel Villa
Nathaniel Villa
Articles: 1771