The Arris SB8200 is one of the most popular cable modems that come with 2 Gigabit ETH-ports. But, it doesn’t have any USB port, which you often find in router models. Sometimes, it is called Arris SURFboard DOCSIS 3.1 Cable Modem as well.
If you want to set up this cable modem, you must log in to its web interface first. Hence, you need to aware of the entire process to access the SB8200 login page. Once you perform the steps correctly, you will be able to configure the router and reset it on your own.
Default Login Credentials for Arris SB8200
Before you go towards the log in process, you need to know the default settings for the Arris SB8200.
- Gateway IP: 192.168.100.1
- Username: admin
- Password: password
- Subnet mask: 255.255.255.0
- DNS server: 192.168.100.1
Note: In order to increase the security and restrict unauthorized access to your network, it is recommended you to reset the default settings.
How to Log in to Arris SB8200 Cable Modem?
Here are the instructions that you need to follow in order to log in to the Arris SB8200 router. Without further delay, let’s begin with the setup procedure.
Step 1: Be sure that your device is connected with the router’s network. To make the connection you can use the LAN or Ethernet cable. On the other hand, you can also connect them wirelessly.
Step 2: After making the connection, launch the default browser and enter “192.168.100.1” inside the IP address bar. Hit the Enter button to proceed further.
Step 3: Once you are done with the previous instructions, you will be prompted with a login dialog box on the screen. Here, you need to enter the login credentials such as username and passcode.
Note: If you already modified the default settings for SB8200, then you have to enter the new login credentials.
After you enter these details successfully, you will be logged in and redirected to the setup page. Here, you can make the necessary changes as per your connection requirement.
In case, these steps don’t work or you face certain issues while logging to Arris SB8200, we suggest you execute the hard reset.
Hard Reset Arris SB 8200 with 30-30-30 Reset
These are the instructions that you need to perform in order to hard reset the Arris router.
- Initially, you need to be sure that the Arris router is powered on.
- Now, locate the reset button from the backside of the router.
- After you find the reset button, take a straightened paper clip to push it for 30 seconds.
- While holding the reset button, remove the power cable from the router and hold it for another 30 seconds.
- Now, turn on the power to the router unit while pressing the reset button for the next 30 seconds.
Once the router boots up, it will be set to its default settings. Thereafter, you can make changes as per the requirements in your Internet or the cable modem.
We hope, after performing these instructions, you will be able to complete the Arris SB8200 login process successfully.
